List of Publications

  

Journal

     
  1. Md. Yousuf Ali,M. A. Alim,and Md. Mashud Karim (2023):Mixed convective heat transfer analysis by heatlines on a lid-driven cavity having heated wavy wall containing tilted square obstacle, Mathematical Problems in Engineering, Hindawi, Volume 2023. https://doi.org/10.1155/2023/1374926
     
  2. S. M. Rashidul Hasan, Md. Mashud Karim (2022):Energy efficiency design index baselines for ships of Bangladesh based on verified ship data, Heliyon, Elsevier, Volume 8, Issue 10, pp.1-11
     
  3. Md. Daluar Hussain, Md. Mashud Karim, Noriyuki Sasaki (2022):Numerical assessment of the scale effects on the propulsive performance of a ship with gate rudder system, Ocean Engineering, vol. 249, pp.1-23.
     
  4. Md. Nasir Uddin, Md. Abdul Alim, Md. Mashud Karim, Md. Monjarul Alam (2021):Effect of aneurysmatic artery on blood flow having permeability in human organ, Journal of Naval Architecture and Marine Engineering, vol. 18, no. 2, pp.155-173.
     
  5. S M Rashidul Hasan, Md. Mashud Karim (2020): Proposed Inland Oil Tanker Design in Bangladesh Focusing CO2 Emission Reduction Based on Revised EEDI Parameters, Journal of Marine Science and Engineering, 8(9), 658.
     
  6. S M Rashidul Hasan, Md. Mashud Karim (2020): Revised Energy Efficiency Design Index Parameters for Inland Cargo Ships of Bangladesh, Journal of Engineering for the Maritime Environment, 234(1), 89–99. https://doi.org/10.1177/1475090219863956
     
  7. Md. Mashud Karim and Nabila Naz (2019): Numerical Study on Flow around Modern Ship Hulls with Rudder-Propeller Interaction, Journal of Marine Science and Application (JMSA), Springer, Vol.18, Issue 4, pp. 400-416.
     
  8. M. Sharif Khan, Md. Mahbubar Rahman and Md. Mashud Karim (2018): CFD Simulation of Flow around 3D Submarine Shaped Body, MIST Journal of Science and Technology, Vol. 6, Issue 1, pp. 61-70, Research and Development Wing, MIST.
     
  9. Md. Mashud Karim and Nabila Naz (2017): Computation of Hydrodynamic Characteristics of Ships using CFD, International Journal of Materials, Mechanics and Manufacturing (IJMMM), Vol.5, No. 4, pp. 219-223. DOI: 10.18178/ijmmm.2017.5.4.322 (Also published in Proceedings of 4th Asia Conference on Mechanical and Materials Engineering, ACMME 2016, Kuala Lumpur, Malaysia, July 14-18, 2016.)
     
  10. Mustafa, N., Karim, M. M. and Sarker, M. A., 2016: Numerical Prediction of Unsteady behavior of Cavitating Flow on Hydrofoils Using Bubble Dynamics Cavitation Model, Journal of Applied Fluid Mechanics., Vol. 9, No. 4, pp. 1829-1837. DOI: 10.18869/acadpub.jafm.68.235.21423
     
  11. Rahman, A. and Karim, M. M., 2015: Green Shipbuilding and Recycling: Issues and Challenges, International Journal of Environmental Science and Development, Vol. 6, No. 11, 2015, IACSIT, Singapore (also published in Proceedings of ICIIM, 2015)
     
  12. Karim, M. M., Bijoy Prasad and Nasif Rahman, 2014: Numerical simulation of free surface water wave for the flow around NACA 0015 hydrofoil using the volume of fluid (VOF) method, Ocean Engineering, Elsevier, 78, 89-94.
     
  13. Karim, M. M. and Ahmmed, M. S., 2012: Numerical study of periodic cavitating flow around NACA0012 hydrofoil, Ocean Engineering, Elsevier, 55, 81-87.
     
  14. Mostafa, M. N. E., Karim, M. M.and Sarker, M. M. A., 2012: Numerical study of unsteady behavior of partial cavitation on two dimensional hydrofoils, Journal of Shipping and Ocean Engineering, 2, 10-17.
     
  15. Karim, M. M., Rahman, M. M. and Alim, M. A., 2011: Comparative study between flows around sphere and pod using finite volume method, Journal of Naval Architecture and Marine Engineering 8 (1), 49-58.
     
  16. Karim, M. M., Rahman, M. M. and Alim, M. A., 2011: Performance of SST k-w turbulence model for computation of viscous drag of axisymmetric underwater bodies, International Journal of Engineering, 24(2), 139-146.
     
  17. Hasan, M. K., Karim, M. M. and Khan, A. H., 2011: Effect of Hub Taper Angle and Pod-Strut Geometry on the Hydrodynamic Characteristics of Podded Propulsion System, Journal of Ship Technology, Vol. 7, No. 2, pp. 63-74.
     
  18. Karim, M. M., Iqbal, K. S., Khondoker, M. R. H. and Rahman, S. M. H. , 2011: Influence of Falling Height on the Behavior of Skid-Launching Free-Fall Lifeboat in Regular Waves, Journal of Applied Fluid Mechanics 4 (1), 77-88.
     
  19. Karim, M. M., Iqbal, K. S., Khondoker, M. R. H. and Rahman, S. M. H. , 2009: Numerical Investgation into the Effect of Launch Skid Angle on the Behaviour of Free-Fall Lifeboat in Regular Waves, International Journal of Small Craft Technology, The Transaction of The Royal Institute of Naval Architects (RINA), UK, Vol 151, Part B1
     
  20. Karim, M. M., Rahman, M. M. and Alim, M. A., 2009: Computation of Turbulent Viscous Flow around Submarine Hull Using Unstructured Grid, Journal of Ship Technology, Institute of Naval Architects, India. (http://www.jstindia.org), ISSN: 0973-1423.
     
  21. Karim, M. M., 2009: A Micro-Genetic Algorithm Based Optimization of Marine Propeller for Podded Propulsion System, Journal of Ocean and Ship Technology, IIT, Kharagpur, India.
     
  22. Karim, M. M., Rahman, M. M. and Alim, M. A., 2009: Computation of Axisymmetric Turbulent Viscous Flow Around Sphere, Journal of Scientific Research, Vol. 1, No. 2, pp 209-219. (http://www.banglajol.info/index.php/JSR), ISSN: 2070-0237(Print); ISSN 2070-0245 (Online).
     
  23. Karim, M. M., Rahman, M. M. and Alim, M. A., 2008: Numerical Computation of Viscous Drag for Axisymmetric Underwater Vehicles, Jurnal Mekanikal, Faculty of Mechanical Engineering, UTM, Malaysia, No. 26, pp. 9-21. ISSN: 0127-3396. (also available on https://www.fkm.utm.my/~mekanika/journal.html)
     
  24. Karim, M. M., Ali, M. A. and Iqbal, K. S., 2008: Influence of Curve Fitting Techniques on Hydrostatic Characteristics of Ship, Journal of Mechanical Engineering, Transaction of the Mechanical Engineering Division, The Institution of Engineers, Bangladesh, Vol. 39, No.2, pp. 100-112, ISSN: 0379-4318. (available on http://www.banglajol.info/index.php/JME)
     
  25. Iqbal, K. S., Bulian, G., Hasegawa, K., Karim, M. M. and Awal, Z. I.: 2008: A Rational Analysis of Intact Stability Hazards Involving Small Inland Passenger Ferries in Bangladesh, Journal of Marine Science and Technology, Springer, Vol. 13, No. 3, pp. 270-281, 0948-4280 (Print); 1437-8213 (Online), doi:10.1007/s00773-008-0016-3.
     
  26. Iqbal, K. S., Bulian, G., Hasegawa, K., Karim, M. M. and Awal, Z. I., 2008: Possible Remedies for Intact Stability Hazards Involving Contemporary Small Inland Passenger Ferries in Bangladesh, Journal of Marine Science and Technology, Springer, Vol.13, No. 3, pp. 282-290, 0948-4280 (Print); 1437-8213 (Online), doi:10.1007/s00773-008-0023-4.
     
  27. Alim, M. A., Rahman, M. M. and Karim, M. M., 2008: Separation Points of Magneto-hydrodynamic Boundary Layer Flow along a Vertical Plate with Exponentially Decreasing Free Stream Velocity, Journal of Naval Architecture and Marine Engineering, Bangladesh, Vol. 4, No.1, pp. 11-18, ISSN: 1813-8535 (Print), ISSN 2070-8998 (Online) (http://www.banglajol.info/index.php/JNAME).
     
  28. Rahman, M. M., Karim, M. M. and Alim, M. A., 2007: Numerical Investigation of Unsteady Flow Past a Circular Cylinder Using 2-D Finite Volume Method, Journal of Naval Architecture and Marine Engineering, Bangladesh, Vol. 4, No.1, pp. 27-42, ISSN 1813-8535 (Print), ISSN 2070-8998 (Online).
     
  29. Karim, M. M., Khan, A. H. and Hasan, M. M. 2006: A Study of Surface Panel Method for the Analysis of Marine Propeller in Steady Flow, Journal of the Institution of Engineers, Bangladesh, Mechanical Engineering Division, Vol. ME 35, pp. 42-54, ISSN: 0379-4318.
     
  30. Karim, M. M., Suzuki, K., and Kai, H., 2004: Optimal Design of Hydrofoil and Marine Propeller Using Micro-Genetic Algorithm (μGA), Journal of Naval Architecture and Marine Engineering, Vol. 1, No. 1, pp.47-61, ISSN 1813-8535 (Print), ISSN 2070-8998 (Online)
     
  31. Karim, M. M. 2002: A Study of Surface Panel Method for Analysis of Hydrofoils, Journal of the Institution of Engineers, Bangladesh, Mechanical Engineering Division, Vol. ME 31, pp. 1-13, ISSN: 0379-4318.
     
  32. Karim, M. M. 2001: Application of Micro-Genetic Algorithm (muGA) to the Optimal Design of Non-cavitating Hydrofoil, Journal of the Institution of Engineers, Bangladesh, Mechanical Engineering Division, Vol.29, No. I & II, pp.66-76, ISSN: 0379-4318.
     
  33. Karim, M. M., Ikehata, M., Suzuki, K. and Kai, H., 2001: Application of Micro-Genetic Algorithm (muGA) to the Optimal Design of Lifting Bodies, Journal of the Kansai Society of Naval Architects, Japan, No.235, March 2001, pp. 1-8.
     
  34. Karim, M. M., Ikehata, M., 2000: Application of Genetic Algorithm to the Optimization of Hydrofoil Using Polynomial Expression of Boundary Element Analysis Results, Journal of the Kansai Society of Naval Architects, Japan, No. 233, pp. 1-9.
     
  35. Karim, M. M. and Khalil, G. M., 1997: Hydrodynamic Damping of the Heaving Motion of an Elliptically Shaped Ship Model, Journal of the Institution of Engineers, Bangladesh, Mechanical Engineering Division, Vol. ME25-26, No. 1, pp. 35-43, ISSN: 0379-4318.
     
  36. Khalil, G. M. and Karim, M. M., 1997: A Study of Damping Forces Acting on Circular Plates Oscillating in Still Water, Journal of the Institution of Engineers, Malaysia, Vol. 58, No. 2, pp. 13-19.
     
  37. Khondoker, M. R. H and Karim M. M., 1997: Investigation of the Influence of the Effects of Launch Rail Length on the Motion Characteristics of a Free-fall Lifeboat, Journal of the Institution of Engineers, Bangladesh, Mechanical Engineering Division, Vol. ME25-26, No. 1, pp. 9-20, ISSN: 0379-4318.


  38. Conference


     
  39. S M Rashidul Hasan, Md. Mashud Karim (2023): Energy-Efficient Inland Ship Design Based on EEDIBD Parameters Using CFD, 4th International Naval Architecture and Maritime Symposium (INT-NAM 2023) held at Naval Architecture and Maritime Faculty, Yildiz Technical University on October 11-13, 2023 in Istanbul, Türkiye.
     
  40. Md Mashud Karim, Ar-Rafi Hasanat, Nazrul Islam (2023): Numerical prediction of hydrodynamic performance of a bulk carrier using CFD, 14th International Conference on Mechanical Engineering (ICME2023) held on 18-19 December, 2023 at BUET, Dhaka, Bangladesh
     
  41. Tayyib Ahsan, Nayma Hassan Emu1, Md. Mashud Karim (2023): Numerical Assessment and Analysis of Calm Water Resistance and Interference Factor of the Series 60 Monohull and Catamaran, 14th International Conference on Mechanical Engineering (ICME2023) held on 18-19 December, 2023 at BUET, Dhaka, Bangladesh
     
  42. S M Rashidul Hasan, Md. Mashud Karim (2022): Energy-efficient inland cargo ship design based on fuel consumption and emission control, 13th International Conference on Marine Technology (MARTEC 2016), 9-10 December 2016, BUET, Dhaka, Bangladesh.
     
  43. Osman Goni Ridwan, Shameem Shahrear Sifat, Fahim Ebnne Idrish, Dr. Md. Mashud Karim (2022): Numerical computation of thermal performance of earth pipe cooling systems, 13th International Conference on Marine Technology (MARTEC 2022), 21-22 December 2022, BUET, Dhaka, Bangladesh.
     
  44. Md. Mashud Karim, Md. Daluar Hussain (2022): Improvement on the propulsive performance of a cargo ship with a gate rudder system, 13th International Conference on Marine Technology (MARTEC 2022), 21-22 December 2022, BUET, Dhaka, Bangladesh.
     
  45. Md. Mashud Karim, Musaddik Rahman Jaowad, Amanat Hossain Emon (2022): Numerical computation of hydrodynamic characteristics of suboff bare hull model, 13th International Conference on Marine Technology (MARTEC 2022), 21-22 December 2022, BUET, Dhaka, Bangladesh.
     
  46. Md. Daluar Hussain, Md. Mashud Karim, Osman Md Amin (2022): Numerical study of the roughness effects on resistance of a bulk carrier, 13th International Conference on Marine Technology (MARTEC 2022), 21-22 December 2022, BUET, Dhaka, Bangladesh.
     
  47. Sajid Hossain, Tawhidur Rahman, Md. Mashud Karim (2022): Numerical prediction of free surface water wave due to the flow around cambered hydrofoil, 13th International Conference on Marine Technology (MARTEC 2022), 21-22 December 2022, BUET, Dhaka, Bangladesh.
     
  48. Md. Mashud Karim, Samin Sadman Shad, Al Ikram Amit (2022): A comparative study of flow analysis around four circular cylinders using the numerical algorithm and ai-based tool, 13th International Conference on Marine Technology (MARTEC 2022), 21-22 December 2022, BUET, Dhaka, Bangladesh.
     
  49. Md. Mashud Karim, Abu Saleh Md. Arman Buhuiyan, Bhubon Thiotonius Costa, Md. Ashifur Rahman (2022): Automated handling of port containers using machine learning, 13th International Conference on Marine Technology (MARTEC 2022), 21-22 December 2022, BUET, Dhaka, Bangladesh.
     
  50. Fahim Ahmed Irfan, Md. Mashud Karim (2022): Detection of underwater ships categorically using power efficient remotely operated vehicle with convolutional neural network, 13th International Conference on Marine Technology (MARTEC 2022), 21-22 December 2022, BUET, Dhaka, Bangladesh.
     
  51. Md. Mashud Karim, Samin Sadman Shad and Al Ikram Amit (2020): Numerical Prediction of Flow Past Offshore Structures at Different Angles Of Attack, 12th International Conference on Marine Technology (MARTEC 2020), Faculty of Engineering, Pattimura University, Ambon, Indonesia, 15-16 October 2020.
     
  52. Saquib Ahmad Bhuiyan, Sowmik Chowdhury, Mehedi Hasan Ahmed, Md. Mashud Karim (2020): CFD Simulation Of Heat Transfer Through Finned Tube Heat Exchanger With Different Shapes Using CNT Nanofluids, 12th International Conference on Marine Technology (MARTEC 2020), Faculty of Engineering, Pattimura University, Ambon, Indonesia, 15-16 October 2020.
     
  53. Md Mahmudul Hasan Abir, M.M.Mahade Hassan Suman, Prantick Bala and Md Mashud Karim (2019): Numerical Simulation of Flow around Surface Piercing Vertical Cylinder, 13th International Conference On Mechanical Engineering (ICME 2019), Department of ME, BUET, Dhaka 1000, Bangladesh.
     
  54. M. Wali Ullah, Sanbera Islam Piuly and Md. Mashud Karim (2019): A Comparative Numerical Study between Liquid Ammonia and Ammonia Based Carbon Nanotube Nanofluid on Application of Cooling System, 13th International Conference On Mechanical Engineering (ICME 2019), Department of ME, BUET, Dhaka 1000, Bangladesh.
     
  55. Md. Mashud Karim, Md. Habibur Rahman and Mohammad Salman Yasin (2018): Numerical Prediction of Free-Surface Wave around Surface Piercing Marine Rudder, 11th International Conference on Marine Technology (MARTEC 2018) held at UTM Kualalumpur, Malaysis, 13-14 August 2018.
     
  56. M. Sharif Khan, Md. Mahbubar Rahman and Md. Mashud Karim (2017): Unsteady CFD Simulation of Flow around 3D Submarine Shaped Body, 20th International Mathematics Conference (IMC 2017), Department of Mathematics, University of Dhaka, Dhaka 1000, Bangladesh.
     
  57. Md. Mashud Karim and Nabila Naz (2016): Computation of Hydrodynamic Characteristics of Ships using CFD, 4th Asia Conference on Mechanical and Materials Engineering (ACMME 2016), Kuala Lumpur, Malaysia, July 14-18, 2016.
     
  58. Md. Mashud Karim, Md. Ariful Hoque and Aevelina Rahman (2016): Simulation of Water Wave Generated by Shallowly Submerged Asymmetric Hydrofoil, 10th International Conference on Marine Technology (MARTEC 2016), 9-10 December 2016.
     
  59. Nabila Naz and Md. Mashud Karim (2016): Investigation of Hydrodynamic Characteristics of High Speed Multihull Vessels including Shallow Water Effect, 10th International Conference on Marine Technology (MARTEC 2016), 9-10 December 2016.
     
  60. Tahsinul Haque Tasif, Md. Habibur Rahman, Arafat Bin Fazle and Md. Mashud Karim (2016): Numerical Prediction Of Flow Past A Marine Rudder, 10th International Conference on Marine Technology (MARTEC 2016), 9-10 December 2016.
     
  61. Md. Imran Uddin and Md. Mashud Karim (2016): Application of Volume of Fluid (VOF) Method for Prediction of Wave Generated by Flow around Cambered Hydrofoil, 10th International Conference on Marine Technology (MARTEC 2016), 9-10 December 2016.
     
  62. Md. Mashud Karim and Nabila Naz (2016): Computation of Flow Field around Ship Hulls including Self Propulsion Characteristics of Propeller at Varying Rudder Positions, 10th International Conference on Marine Technology (MARTEC 2016), 9-10 December 2016.
     
  63. Tahsinul Haque Tasif and Md. Mashud Karim (2016): Effect of Fish Wedge on the Hydrodynamic Characteristics of a Marine Rudder, 10th International Conference on Marine Technology (MARTEC 2016), 9-10 December 2016.
     
  64. Ataur Rahman, Md Refayet Ullah and Md. Mashud Karim (2016):Marine Propeller Design Method based on Lifting Line Theory and Lifting Surface Correction Factors, 10th International Conference on Marine Technology (MARTEC 2016), 9-10 December 2016.
     
  65. Md. Mashud Karim and S.M. Rashidul Hasan (2016): Establishment of EEDI Baseline for Inland Ship of Bangladesh, 10th International Conference on Marine Technology (MARTEC 2016), 9-10 December 2016.
     
  66. Nafis Fuad, Mohammad Kifayath Chowdhury, Mohammad Salman Yasin and Md. Mashud Karim (2016): Development of a novel device for harnessing wasted energy behind a marine propeller, 10th International Conference on Marine Technology (MARTEC 2016), 9-10 December 2016.
     
  67. Shadman Sakib and Md. Mashud Karim (2016): Design and Development of a Cheap Slosh Testing Rig as Laboratory Equipment, 10th International Conference on Marine Technology (MARTEC 2016), 9-10 December 2016.
     
  68. Naz, N. and Karim, M. M., 2016: Computation Of Free Surface Potential Flow Around Different Ship Models Using Computational Fluid Dynamics, International Conference on Research & Innovations in Science and Technology (ICRIST-Bangkok) held on 2-3 February, Thiland.
     
  69. Karim, M. M. and Naz, N., 2016: Simulation of Potential Flow Around Surface Ship using ShipFlow, 2nd International Youth and Educators Summit (YES) at Dhaka, Bangladesh to be held on 28-30 April, Dhaka, Bangladesh.
     
  70. Karim, M. M. and Hasan, S. M. R., 2015: Optimization of Bangladeshi Inland Vessels With Respect To Energy Efficiency Design Index (EEDI) (ICME 2015) held on 18-20 December 2015 at BUET, Dhaka.
     
  71. Rahman, A. and Karim, M. M., 2015: Green Shipbuilding and Recycling: Issues and Challenges, 3rd International Conference on Innovation and Information Management (ICIIM 2015) held on 17-18 January 2015 at Kuala Lumpur, Malaysia.
     
  72. Karim, M. M., Monim, M. H. and Miazi, A. A., 2014: Apllication of Finite Volume Method for Prediction of Cavitating Flow Around NACA 0015 Hydrofoil, Proceedings of the International Conference on Marine Technology (NARTEC 2014) held at ITS, Surabaya, Indonesia.
     
  73. Karim, M. M., Prasad, B. and Rahman, N., 2012: Application of Finite Volume Method for Prediction of Surface Wave Generated by Flow Around Shallowly Submerged Hydrofoil, Proceedings of The International Conference on Marine Technology (MARTEC 2012) held on 20-22 October 2012 at UMT, Terengganu, Malaysia.
     
  74. Ahmmed, M. S., Karim, M. M., Ahmed, M. U. and Rahman, M. S., 2012: Cost and Man-Hour Estimation of the Production of Merchant Ship at Design Stage, Proceedings of The International Conference on Marine Technology (MARTEC 2012) held on 20-22 October 2012 at UMT, Terengganu, Malaysia.
     
  75. Md. Arbab Iqbal, Ahmmed, M. S. and Karim, M. M., 2012: Experimental Investigations of Air Flow Characteristics in Solar Chimneys and Trombe Walls, Proceedings of The International Conference on Marine Technology (MARTEC 2012) held on 20-22 October 2012 at UMT, Terengganu, Malaysia.
     
  76. Karim, M. M. and Ahmmed, M. S., 2011: Application of computational fluid dynamics to simulate cavitating flow around hydrofoil, Proceedings of the 9th International Conference on Mechanical Engineering (ICME) held on 18-20 December 2011 at BUET, Dhaka, Bangladesh
     
  77. Ali, M. A. and Karim, M. M., 2010: Numerical Study of Free Surface Effect on the Flow Around Shallowly Submerged Hydrofoil, Proceedings of The International Conference on Marine Technology (MARTEC 2010) held on 11-12 December 2010 at BUET, Dhaka, Bangladesh
     
  78. Karim, M. M., Mostafa, N. and Sarker, M. M. A.,2009: Numerical Prediction of Unsteady Cavitating Flow around a Hydrofoil, 16th Mathematics Conference of Bangladesh Mathematical Society, 17 - 19 December, 2009, BUET, Dhaka, Bangladesh.
     
  79. Hasan, M. K., Karim, M. M. and Khan, A. H., 2009: Effect of Hub Taper Angle and Pod-Strut Geometry on the Hydrodynamic Characteristics of Podded Propulsion System, 16th Mathematics Conference of Bangladesh Mathematical Society 17-19 December, 2009, BUET, Dhaka, Bangladesh.
     
  80. Karim, M. M., Islam, M. F., Hasan, M. K. and Khan, A. H., 2008: Influence of Hub Taper Angle on the Hydrodynamic Performance of Podded Propulsion Systems, Proceedings of the 2nd Regional Conference on Vehicle Engineering and Technology (RIVET2008) held at Kuala Lumpur, Malaysia, on 15-17 July 2008. (http://seminar.spaceutm.edu.my/rivet2008/)
     
  81. Karim, M. M., Rahman, M. M. and Alim, M. A., 2008: Numerical Computation of Viscous Drag for Axisymmetric Underwater Vehicle, Proceedings of the 2nd Regional Conference on Vehicle Engineering and Technology (RIVET2008) held at Kuala Lumpur, Malaysia, on 15-17 July 2008. (http://seminar.spaceutm.edu.my/rivet2008)
     
  82. Iqbal, K. S., Hasegawa, K., Bulian, G., Karim, M. M., and Awal, Z. I., 2007: Passenger Ferry Accidents in Bangladesh: Design and Socio-economic Aspects, Proceedings of the 10th International Symposium on Practical Design of Ships and Other Floating Structures, Houston, Texas, USA.
     
  83. Karim, M. M. and Ali, M. A., 2006: Comparative Study of Curve Fitting Techniques for Fairing of Ship Lines, 11th Annual Paper Meet, Mechanical Engineering Division, The Institute of Engineers, Bangladesh held at Dhaka.
     
  84. Ghassemi, H., Karim, M. M. and Ikehata, M., 2000: Non-linear Method Applied to Partially Cavitating Three Dimensional Hydrofoils, Proceedings of the fourth International Conference of Hydrodynamics (ICHD2000), Yokohama, Japan, 7-9 September.
     
  85. Karim, M. M. and Ikehata, M., 2000: A Genetic Algorithm (GA) Based Optimization Technique for the Design of Marine Propeller, Propeller/Shafting 2000 symposium organized by SNAME, held at Virginia Beach, USA, 20-21 September.
     
  86. Karim, M. M. and Khondoker, M. R. H., 2000: A Study of Surface Panel Method for the Hydrodynamic Analysis of Lifting Body, Proceedings of the Annual Paper Meet and International Conference, Mechanical Engineering Division, The Institution of Engineers, held at Dhaka, Bangladesh.
     
  87. Karim, M. M. and Khalil, G. M., 1997: Effect of Spring Constant on the Damping of Oscillating Circular Cylinder, Proceedings of the Third Annual Paper Meet, Mechanical Engineering Division, The Institution of Engineers, held at Chittagong, Bangladesh.
     
  88. Khalil, G. M. and Karim, M. M., 1997: An Experimental Investigation into the Hydrodynamic Damping Forces Acting on Bodies Heaving in Water, Proceedings of the Conference on Ship and Ocean Technology (SHOT-97), held at IIT, Kharagpur, India.
     
  89. Khalil, G. M. and Karim, M. M., 1995: A Study of the Hydrodynamic Damping Forces Acting on Oscillating Circular Plates, Proceedings of the Second Annual Paper Meet, Mechanical Engineering Division, The Institution of Engineers, held at Rajshahi, Bangladesh.
     
  90. Karim, M. M. and Rahim, A., 1994: Extent of Trim Correction on the Stability of Inland Passenger Vessel, Proceedings of the First Annual Paper Meet, Mechanical Engineering Division, The Institution of Engineers, held at Khulna, Bangladesh.


  91. Poster


     
  92. Ahsanul Haque Mahin, Mariyam Akter Tumpa and Md. Mashud Karim (2019): Propeller Performance Analysis Using Lifting Line Theory, 13th International Conference On Mechanical Engineering (ICME 2019), Department of ME, BUET, Dhaka 1000, Bangladesh.

  93. Karim, M. M., Mamun, A. A. and Monim, M. H., 2013: Application of Finite Volume Method for Prediction of Wave Generated by Flow Around a Pair of Circular Cylinders in Tandem Arrangement, 10th International Conference on Mechanical Engineering (ICME 2013) held on 20 - 21 June 2014 at BUET, Dhaka, Bangladesh.


     

    Presentations


     
  94. Karim, M. M. and Ikehata, M., 2000: A Study on Genetic Algorithms and Their Applications to Propeller Design, Presented at the 2nd Intl. Japan-Korea Symposium on Advanced Engineering and Science, Yokohama, Japan, 30 Nov.-1 Dec.


Check Google Scholar