Photgraph

Professor Mashud Karim's Personal Page

BUET NAME
×

Short Biography

I was born in Madaripur, a renowned district in central Bangladesh and a part of the Dhaka Division. I moved to Dhaka, a capital city of Bangladesh in 1982 for my high school education and admitted to Lalmatia Housing Society Boys' High School. After passing Secondary School Certificate (SSC), I admitted to Dhaka College and completed my Higher Secondary School (HSC) Exam. Then I admitted to BUET in the Dept. of Naval Architecture and Marine Engineering.

Professional Experiences

2009: Professor, Dept. of Naval Architecture and Marine Engineering, BUET

2004: Associate Professor, Dept. of Naval Architecture and Marine Engineering, BUET

1996: Assistant Professor, Dept. of Naval Architecture and Marine Engineering, BUET

1994: Lecturer, Dept. of Naval Architecture and Marine Engineering, BUET

1992: Teaching Assistant, Dept. of Naval Architecture and Marine Engineering, BUET

 

Academic Qualification

2001: Ph.D (Naval Architecture and Ocean Engineering), Yokohama National University, JAPAN

1996: M.Sc. Engg. (Naval Architecture and Marine ), BUET

1992: B.Sc  Engg. (Naval Architecture and Marine), BUET

 

Memberships

Life Member, Association of Naval Architects and Marine Engineers (ANAME), Bangladesh

Life Member, Japanese University Alumni Association of Bangladesh (JUAAB)

Member, Panel Supervisor Forum (PSF)

Publication

    Journal
  1. S Das, MM Khan, MM Karim (2025): Numerical Study on the Effects of Bulbous Bow Shape to Improve the Hydrodynamic Characteristics of KCS Hull using CFD, Journal of Maritime Research, 22 (1), 280-289

  2. S Hossain, T Rahman, MM Karim (2023): Numerical prediction of free surface water wave for the flow around cambered hydrofoil, Journal of Naval Architecture and Marine Engineering, 20 (3), 1-10

  3. NE Chowdhury, MF Hossain, MM Karim, MR Islam, AA Bhuiyan (2023): Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, March, 2023. Q2, DOI: 10.1007/s40997-023-00636-y

  4. MY Ali, MA Alim, MM Karim (2023): Mixed Convective Heat Transfer Analysis by Heatlines on a Lid-riven Cavity Having Heated Wavy Wall Containing Tilted Square Obstacle, Mathematical Problems in Engineering, 2023 (1), 1374926

  5. SMR Hasan, MM Karim (2022): Reanalysis of the revised EEDI parameters for inland ships of Bangladesh, Journal of Engineering for the Maritime Environment, Sage Journals, 237(3):717-733. doi:10.1177/14750902221131418

  6. MD Hussain, MM Karim, N Sasaki (2022): Numerical assessment of the scale effects on the propulsive performance of a ship with gate rudder system, Ocean Engineering, 249, 110889

  7. SMR Hasan, MM Karim (2022): Energy efficiency design index baselines for ships of Bangladesh based on verified ship data, Heliyon, 8 (10)

  8. MN Uddin, MA Alim, MM Karim, MM Alam (2021): Effect of aneurysmatic artery on blood flow having permeability in human organ, Journal of Naval Architecture and Marine Engineering 18 (2), 155-173

  9. SM Hasan, M Karim (2020): Revised energy efficiency design index parameters for inland cargo ships of Bangladesh, Journal of Engineering for the Maritime Environment, Sage Journals, 234(1), 89-99. doi:10.1177/1475090219863956

  10. SM Hasan, M Karim (2020): Proposed Inland Oil Tanker Design in Bangladesh Focusing CO2 Emission Reduction Based on Revised EEDI Parameters, Journal of Marine Science and Engineering, 8 (9), 658

  11. MM Karim, N Naz (2019): Numerical Study on Flow Around Modern Ship Hulls with Rudder-Propeller Interactions, Journal of Marine Science and Application, 18, 400-416

  12. MS Khan, MM Rahman, MM Karim (2018): CFD simulation of flow around 3D submarine shaped body, MIST International Journal of Science and Technology, 6 (1)

  13. MM Karim, N Naz (2017): Computation of Hydrodynamic Characteristics of Ships Using CFD, Int. J. Mater. Mech. Manuf 5 (4), 219-223

  14. N Mostafa, MM Karim, MMA Sarker (2016): Numerical prediction of unsteady behavior of cavitating flow on hydrofoils using bubble dynamics cavitation model, Journal of Applied Fluid Mechanics, 9 (4), 1829-1837

  15. A Rahman, MM Karim (2015): Green Shipbuilding and Recycling: Issues and Challenges, International Journal of Environmental Science and Development, 6 (11), 838

  16. MM Karim, B Prasad, N Rahman (2014): Numerical simulation of free surface water wave for the flow around NACA 0015 hydrofoil using the volume of fluid (VOF) method, Ocean Engineering, 78, 89-94

  17. MM Karim, MS Ahmmed (2012): Numerical study of periodic cavitating flow around NACA0012 hydrofoil, Ocean Engineering 55, 81-87 2012

  18. M Nur-E-Mostafa, MM Karim, MMA Sarker (2012): Numerical study of unsteady behavior of partial cavitation on two dimensional hydrofoils, Journal of Shipping and Ocean Engineering, 2 (1).

  19. MM Karim, KS Iqbal, MRH Khondoker, SM Rahman(2012): Influence of falling height on the behavior of skid-launching free-fall lifeboat in regular waves, Journal of Applied Fluid Mechanics, 4 (1), 77-88

  20. MM Karim, MM Rahman, MA Alim (2011): Comparative study between flows around sphere and pod using finite volume method, Journal of Naval Architecture and Marine Engineering, 8 (1), 49-58

  21. MM Karim, N Mostafa, MMA Sarker (2010): Numerical study of unsteady flow around a cavitating hydrofoil, Journal of Naval Architecture and Marine Engineering, 7 (2), 51-60

  22. MM Karim, MM Rahman, MA Alim (2009): Computation of axisymmetric turbulent viscous flow around sphere, Journal of Scientific Research, 1 (2), 209-219

  23. MM Karim, MM Rahman, MA Alim (2009): Computation of turbulent viscous flow around submarine hull using unstructured grid, Journal Of Ship Technology, 5 (1), 973-1423

  24. MM Karim, KS Iqbal, MRH Khondoker, SMH Rahman (2009): Numerical investigation into the effect of launch skid angle on the behaviour of free-fall lifeboat in regular waves, Trans. RINA, 151

  25. MM Karim, MM Rahman, MA Alim (2008): Numerical computation of viscous drag for axisymmetric under water vehicles, Jurnal Mekanikal 26, 9-21

  26. KS Iqbal, G Bulian, K Hasegawa, MM Karim, ZI Awal (2008): A rational analysis of intact stability hazards involving small inland passenger ferries in Bangladesh, Journal of marine science and technology, 13, 270-281

  27. KS Iqbal, G Bulian, K Hasegawa, MM Karim, ZI Awal (2008): Possible remedies for intact stability hazards involving contemporary small inland passenger ferries in Bangladesh, Journal of marine science and technology, 13, 282-290

  28. MA Alim, MM Rahman, MM Karim (2008): Separation Points of Magneto-hydrodynamic Boundary Layer Flow Along a Vertical Plate with Exponentially Decreasing Free Stream Velocity, Journal of Naval Architecture and Marine Engineering, 5 (1), 11-18

  29. MM Karim, MA Ali, KS Iqbal (2008): Influence of curve fitting techniques on hydrostatic characteristics of ship, Journal of Mechanical Engineering, 39 (2), 100-112

  30. MM Rahman, MM Karim, MA Alim (2007): Numerical investigation of unsteady flow past a circular cylinder using 2-D finite volume method, Journal of Naval Architecture and Marine Engineering, 4 (1), 27-42

  31. MM Karim, K Suzuki, H Kai (2004): Optimal design of hydrofoil and marine propeller using micro-genetic algorithm (µGA), Journal of Naval Architecture and Marine Engineering, 1 (1), 47-61

  32. M Karim, M Ikehata, K Suzuki, H Kai(2001):Application of micro-genetic algorithm (μGA) to the optimal design of lifting bodies, Journal of the Kansai Society of Naval Architects, Japan 2001 (235), 1-8

  33. MM Karim, M Ikehata (2000): Application of Genetic Algorithm to the Optimization of Hydrofoil Using Polynomial Expression of Boundary Element Analysis Results, Journal of Kansai Society of Naval Architects of Japan, 1-10

  34. Rahman, M. M., Karim, M. M. and Alim, M. A., 2007: Numerical Investigation of Unsteady Flow Past a Circular Cylinder Using 2-D Finite Volume Method, Journal of Naval Architecture and Marine Engineering, Vol. 4, No.1.

  35. Karim, M. M., Khan, A. H. and Hasan, M. M. 2006: A Study of Surface Panel Method for the Analysis of Marine Propeller in Steady Flow, Journal of the Institution of Engineers, Bangladesh, Mechanical Engineering Division, Vol. ME 35.

  36. Karim, M. M., Suzuki, K., and Kai, H., 2004: Optimal Design of Hydrofoil and Marine Propeller Using Micro-Genetic Algorithm (μGA), Journal of Naval Architecture and Marine Engineering, Vol. 1, No. 1.

  37. Karim, M. M. 2002: A Study of Surface Panel Method for Analysis of Hydrofoils, Journal of the Institution of Engineers, Bangladesh, Mechanical Engineering Division, Vol. ME 31.

  38. Karim, M. M. 2001: Application of Micro-Genetic Algorithm (μGA) to the Optimal Design of Non-cavitating Hydrofoil, Journal of the Institution of Engineers, Bangladesh, Mechanical Engineering Division, Vol.29, No. I & II.

  39. Karim, M. M., Ikehata, M., Suzuki, K. and Kai, H., 2001: Application of Micro-Genetic Algorithm (μGA) to the Optimal Design of Lifting Bodies, Journal of the Kansai Society of Naval Architects of Japan (KSNAJ), No.235, March 2001

  40. Karim, M. M., Ikehata, M., 2000: Application of Genetic Algorithm to the Optimization of Hydrofoil Using Polynomial Expression of Boundary Element Analysis Results, Journal of the Kansai Society of Naval Architects, Japan, No. 233, March 2000

  41. Karim, M. M. and Khalil, G. M., 1997: Hydrodynamic Damping of the Heaving Motion of an Elliptically Shaped Ship Model, Journal of the Institution of Engineers, Bangladesh, Mechanical Engineering Division, Vol. ME25-26, No. 1

  42. Khalil, G. M. and Karim, M. M., 1997: A Study of Damping Forces Acting on Circular Plates Oscillating in Still Water, Journal of the Institution of Engineers, Malaysia, Vol. 58, No. 2.

  43. Khondoker, M. R. H and Karim M. M., 1997: Investigation of the Influence of the Effects of Launch Rail Length on the Motion Characteristics of a Free-fall Lifeboat, Journal of the Institution of Engineers, Bangladesh, Mechanical Engineering Division, Vol. ME25-26, No. 1.

    44. Conference

  44. MM Karim, T Ahsan, NH Emu (2024): Effect Of Surface Roughness on the Calm Water Resistance and Interference Factor of the Series 60 Catamaran, Proceedings of the 14th International Conference on Marine Technology (MARTEC 2024) held at Zohor Bahru, Malaysia on 24-25 September.

  45. S Hossain, MM Karim (2024): Numerical Simulation of Podded Propeller using CFD, Proceedings of the 14th International Conference on Marine Technology (MARTEC 2024) held at Zohor Bahru, Malaysia on 24-25 September.

  46. AF Ibnath, MM Karim (2024): Numerical Prediction of Interference Resistance for a Series 60 Catamaran Hull with Varying Breadth and Draft, Proceedings of the 14th International Conference on Marine Technology (MARTEC 2024) held at Zohor Bahru, Malaysia on 24-25 September.

  47. MMH Bappy, AR Hasanat, MM Karim (2024): A Comparative Study on Resistance Prediction of Ships Using Different CFD Solvers, Proceedings of the 14th International Conference on Marine Technology (MARTEC 2024) held at Zohor Bahru, Malaysia on 24-25 September.

  48. T Ahsan, NH Emu, MM Karim (2023): Numerical Assessment and Analysis of Calm Water Resistance and Interference Factor of the Series 60 Monohull and Catamaran, Proceedings of the 14th International Conference on Mechanical Engineering (ICME 2023), held at BUET, on 18-19 December. Available at SSRN 4890553 2024

  49. MM Karim, AR Hasanat, N Islam (2023): Numerical Prediction of Hydrodynamic Performance of a Bulk Carrier Using CFD, Proceedings of the 14th International Conference on Mechanical Engineering (ICME 2023), held at BUET, on 18-19 December. Available at SSRN 4861830 2024

  50. MM Karim, MD Hussain (2022): Improvement on the Propulsive Performance of a Cargo Ship with a Gate Rudder System, Proceedings of the 13th International Conference on Marine Technology (MARTEC 2022) held at BUET on 21-22 December. icmartec.net

  51. MM Karim, SS Shad (2022): A COMPARATIVE STUDY OF FLOW ANALYSIS AROUND FOUR CIRCULAR CYLINDERS USING THE NUMERICAL ALGORITHM AND AI-BASED TOOL, Proceedings of the 13th International Conference on Marine Technology (MARTEC 2022) held at BUET on 21-22 December. icmartec.net

  52. MM Karim, ASMA Buhyian, BT Costa, MA Rahman (2022): AUTOMATED HANDLING OF PORT CONTAINERS USING MACHINE LEARNING, Proceedings of the 13th International Conference on Marine Technology (MARTEC 2022) held at BUET on 21-22 December. icmartec.net

  53. FA Irfan, MM Karim (2022): Detection of Underwater Ships Categorically Using Convolutional Neural Network and Power Efficient Remotely Operated Vehicle, Proceedings of the 13th International Conference on Marine Technology (MARTEC 2022) held at BUET on 21-22 December. icmartec.net

  54. MD Hussain, MM Karim, OM Amin(2022): NUMERICAL STUDY OF THE ROUGHNESS EFFECTS ON RESISTANCE OF A BULK CARRIER, Proceedings of the 13th International Conference on Marine Technology (MARTEC 2022) held at BUET on 21-22 December. icmartec.net

  55. MM Karim, MR Jaowad, AH Emon (2022): NUMERICAL COMPUTATION OF HYDRODYNAMIC CHARACTERISTICS OF SUBOFF BARE HULL MODEL, Proceedings of the 13th International Conference on Marine Technology (MARTEC 2022) held at BUET on 21-22 December. icmartec.net

  56. OG Ridwan, SS Sifat, FE Idrish, MM Karim (2022): NUMERICAL COMPUTATION OF THERMAL PERFORMANCE OF EARTH PIPE COOLING SYSTEMS, Proceedings of the 13th International Conference on Marine Technology (MARTEC 2022) held at BUET on 21-22 December. icmartec.net

  57. SMR Hasan, MM Karim (2022) ENERGY-EFFICIENT INLAND CARGO SHIP DESIGN BASED ON FUEL CONSUMPTION AND CO2 EMISSION CONTROL USING CFD, Proceedings of the 13th International Conference on Marine Technology (MARTEC 2022) held at BUET on 21-22 December. icmartec.net

  58. SMR Hasan, MM Karim (2020): Possibility of CO2 Emission Reduction from Inland Oil Tankers Based on Revised EEDI Parameters, Preprints.org, 2020

  59. SA Bhuiyan, S Chowdhury, MH Ahmed, MM Karim (2020) CFD SIMULATION OF HEAT TRANSFER THROUGH FINNED TUBE HEAT EXCHANGER WITH DIFFERENT SHAPES USING CNT NANOFLUIDS, 12th International Conference on Marine Technology (MARTEC 2020) held at BUET on 15-16 October.

  60. MMH Abir, MMMH Suman, P Bala, MM Karim (2019): Numerical simulation of flow around surface piercing vertical cylinder, Proceedings of the 14th International Conference on Mechanical Engineering (ICME 2019), held at BUET, on 18-20 December. AIP Conference Proceedings 2324 (1), 040012 2021, AIP Conf. Proc. 2324, 040012 (2021) https://doi.org/10.1063/5.0037668

  61. M. Wali Ullah, Sanbera Islam Piuly, Md. Mashud Karim (2019): A comparative numerical study between liquid ammonia and ammonia based carbon nanotube nanofluid on application of cooling system Available Proceedings of the 14th International Conference on Mechanical Engineering (ICME 2019), held at BUET, on 18-20 December. AIP Conf. Proc. 2324, 050008 (2021) https://doi.org/10.1063/5.0037714

  62. MM Karim, M Rahman, MA Hai, MM Shimul, SH Sudhi (2018): Numerical investigation of flow around cavitating hydrofoil using finite volume method, AIP Conference Proceedings, 1980 (1).

  63. MI Uddin, MM Karim (2017): Application of Volume of Fluid (VOF) Method for Prediction of Wave Generated by Flow around Cambered Hydrofoil, Procedia Engineering, 194, 82-89.

  64. MM Karim, SMR Hasan (2017): Establishment of EEDI Baseline for Inland Ship of Bangladesh, Procedia Engineering, 194, 370-377.

  65. A Rahman, MR Ullah, MM Karim (2017): Marine Propeller Design Method based on Lifting Line Theory and Lifting Surface Correction Factors,Procedia Engineering, 194, 174-181.

  66. MM Karim, N Naz (2017): Computation of Flow Field around Ship Hull including Self Propulsion Characteristics at Varying Rudder Positions, Procedia Engineering. 194, 96-103.

  67. N Naz, MM Karim (2017): Investigation of Hydrodynamic Characteristics of High Speed Multihull Vessels including Shallow Water Effect, Procedia Engineering, 194, 51-58.

  68. MA Hoque, MM Karim, A Rahman (2017): Simulation of Water Wave Generated by Shallowly Submerged Asymmetric Hydrofoil, Procedia Engineering, 194, 38-43.

  69. S Sakib, MM Karim (2017): Design and Development of a Cheap Slosh Testing Rig as Laboratory Equipment, Procedia Engineering, 194, 401-406.

  70. TH Tasif, MM Karim (2017): Effect of Fish Wedge on the Hydrodynamic Characteristics of a Marine Rudder, Procedia Engineering 194, 136-143

  71. TH Tasif, MH Rahman, AB Fazle, MM Karim (2017): Numerical Prediction of Flow Past a Marine Rudder, Procedia Engineering, 194, 59-66.

  72. N Fuad, MK Chowdhury, MS Yasin, MM Karim (2017): Development of a Novel Device for Harnessing Wasted Energy Behind a Marine Propeller, Procedia Engineering, 194, 378-385.

  73. A Rahman, MM Karim (2015) Overview of Alternative Fuels and Their Drivers to Reduce Emissions in the Shipping Industry, International Conference on Mechanical and Industrial Engineering(ICMAIE 2015)

  74. M Karim, R Hasan (2015): Optimization of Bangladeshi Inland Vessels with respect to Energy Efficiency Design Index (EEDI), 11th International Conference on Mechanical Engineering (ICME 2015)

  75. MS Ahmmed, MM Karim, MS Mohi Uddin Ahmed (2012): Cost and ManHour Estimation of the Production of Merchant Ship at Design Stage, 8th international conference on Marine Technology (MARTEC 2012), Malaysia

  76. MS Ahmmed, MM Karim (2011): APPLICATION OF COMPUTATIONAL FLUID DYNAMICS TO SIMULATE CAVITATING FLOW AROUND HYDROFOIL, 9th International Conference on Mechanical Engineering (ICME 2011), held at BUET on 18-20 December.

  77. N Mostafa, MM Karim, MMA Sarker (2010): A study on numerical analysis of unsteady flow over two dimensional hydrofoils, International Conference of Marine Technology (MARTEC 2010)

  78. MA Ali, MM Karim (2010): NUMERICAL STUDY OF FREE SURFACE EFFECT ON THE FLOW AROUND SHALLOWLY SUBMERGED HYDROFOIL, International Conference of Marine Technology (MARTEC 2010)

  79. KS Iqbal, K Hasegawa, G Bulian, MM Karim, ZI Awal (2007): Passenger Ferry Accidents in Bangladesh: Design and Socio-economic Aspects, Proceedings of the 10th International Symposium on Practical Design of Ships

  80. M Karim, M Ikehata (2003): Application of Micro-genetic Algorithm (µGA) to the Optimal Design of Hydrofoil and Marine Propellers, SNAME Propeller and Shafting Symposium, D021S002R009 2003

  81. MM Karim and M. Ikehata (2001): Application of Genetic Algorithms to the Optimal Design of Lifting Bodies Incorporating Boundary Element Analysis,横浜国立大学 2001

  82. MM Karim, M Ikehata (2000): A genetic algorithm (GA)-based optimization technique for the design of marine propeller, Proceedings of the propeller/shafting 2000 symposium. Virginia Beach, USA 2000 1-8

  83. MM Karim, M Ikehata (1999): An Optimization Technique for the Design of 3-D Hydrofoil Analyzing it by Boundary Element Method, Proceedings of The Kansai Society of Naval Architects 13, 17-20 1999

  84. SM Hasan, MM Karim, Hasan, Energy-Efficient Inland Ship Design Based on Fuel Consumption and CO2 Emission Control Using CFD. Available at SSRN: https://ssrn.com/abstract=4384883 or http://dx.doi.org/10.2139/ssrn.4384883

  85. Iqbal, K. S., Hasegawa, K., Bulian, G., Karim, M. M., and Awal, Z. I., 2007: Passenger Ferry Accidents in Bangladesh: Design and Socio-economic Aspects, Proceedings of the 10th International Symposium on Practical Design of Ships and Other Floating Structures, Houston, Texas, United States of America.

  86. Karim, M. M. and Ali, M. A., 2006: Comparative Study of Curve Fitting Techniques for Fairing of Ship Lines, 11th Annual Paper Meet, Mechanical Engineering Division, The Institute of Engineers, Bangladesh held at Dhaka.

  87. Ghassemi, H., Karim, M. M. and Ikehata, M., 2000: Non-linear Method Applied to Partially Cavitating Three Dimensional Hydrofoils, Proceedings of the fourth International Conference of Hydrodynamics (ICHD2000), Yokohama, Japan, 7-9 September.

  88. Karim, M. M. and Ikehata, M., 2000: A Genetic Algorithm (GA) Based Optimization Technique for the Design of Marine Propeller, Propeller/Shafting 2000 symposium organized by SNAME, held at Virginia Beach, USA, 20-21 September.

  89. Karim, M. M. and Khondoker, M. R. H., 2000: A Study of Surface Panel Method for the Hydrodynamic Analysis of Lifting Body, Proceedings of the Annual Paper Meet and International Conference, Mechanical Engineering Division, The Institution of Engineers, held at Dhaka, Bangladesh.

  90. Karim, M. M. and Khalil, G. M., 1997: Effect of Spring Constant on the Damping of Oscillating Circular Cylinder, Proceedings of the Third Annual Paper Meet, Mechanical Engineering Division, The Institution of Engineers, held at Chittagong, Bangladesh.

  91. Khalil, G. M. and Karim, M. M., 1997: An Experimental Investigation into the Hydrodynamic Damping Forces Acting on Bodies Heaving in Water, Proceedings of the Conference on Ship and Ocean Technology (SHOT-97), held at IIT, Kharagpur, India.

  92. Khalil, G. M. and Karim, M. M., 1995: A Study of the Hydrodynamic Damping Forces Acting on Oscillating Circular Plates, Proceedings of the Second Annual Paper Meet, Mechanical Engineering Division, The Institution of Engineers, held at Rajshahi, Bangladesh.

  93. Karim, M. M. and Rahim, A., 1994: Extent of Trim Correction on the Stability of Inland Passenger Vessel, Proceedings of the First Annual Paper Meet, Mechanical Engineering Division, The Institution of Engineers, held at Khulan, Bangladesh.

    94. Presentation
  94. AH Mahin, MA Tumpa, MM Karim (2019): Propeller Performance Analysis Using Lifting Line Theory, 13th International Conference on Mechanical Engineering (ICME 2019)held at BUET on 18-20 December.

  95. MM Karim, AA Mamun, MH Monim (2013): Application of Finite Volume Method for Prediction of Wave Generated by Flow Around a Pair of Circular Cylinders in Tandem Arrangement, 10th International Conference on Mechanical Engineering (ICME 2013)held at BUET on 20-21 June 2014.

  96. Karim, M. M. and Ikehata, M., 2000: A Study on Genetic Algorithms and Their Applications to Propeller Design, Presented at the 2nd Intl. Japan-Korea Symposium on Advanced Engineering and Science, Yokohama, Japan, 30 Nov.-1 Dec.